Rival Carbon CE Gloves (Camo)

Specification

We updated your favorite gloves with drool-worthy looks and safety. A fresh carbon finished knuckle armor raises the style quotient while being CE Level 2 safe. We also did improvements to pinky-finger slide zone for added safety.

The Rival CE gloves are proof that lightweight, comfortable and inexpensive summer gloves are still there – and still the perfect amount of protection for bombing around on your bike for the daily commute.

The whole glove is CE approved to standard EN 13594:2015 (Protective gloves for motorcycle on-road use)

The Rival gloves pass following tests –

Impact Protection for Knuckle armor - Passed CE Level 2 standards (new for Carbon variant, 2024)
Impact abrasion resistance: Residual force below 9 kN (kiloNewtons)
Abrasion resistance: Slide time ≥ 4 seconds.
Cut resistance on palm: ≥2N (Newtons)
Seam strength: Main seams ≥6kN per millimeter.
Tear strength: on palm ≥ 25N and back hand ≥ 18N (Newtons)

Impact safety –

Carbon finished knuckle armor, CE Level 2 certified knuckle impact protection.

Scaphoid Bone protection: KNOX® Sport SPS (Scaphoid Protection System) Part #301.

Scaphoid injury is the most common hand injury caused by the grab effect when the palm of the hand makes contact with the ground. The Knox SPS™ works by attaching 2 parts to the palm of the glove, making a bridge over the scaphoid. These plastic parts act as a slider eliminating the grab effect and scaphoid injuries. This has proven to be a very effective system for riders with no loss of flexibility, discomfort or interference with the controls when operating the bike.

TPR hard-protectors for index and middle finger

Foam finger-inserts for ring, pinky finger and thumb

Leather on tips of fingers for durability

Abrasion safety –

Durable multi-panel main shell incorporating full-grain leather and 3D mesh.

KNOX® SPS™ palm sliders part 301

Fit and comfort –

Adjustable hook and loop closure.

Touch sensitive index finger-tip and thumb.

Palm-grip printing.

Sturdy mesh panels on back of hand and fingers.

Accordion stretch panels for flexibility.

More features –

Reflective inserts on finger joints for added visibility.

Ergonomic stretch panels between finger joints.

NOTE: PRODUCT IS NOT WATERPROOF / WATER-RESISTANT

MADE IN INDONESIA

__PRESENT

Return & Exchange

Return-Exchange policy

We want you to be completely happy with your purchase. Your unworn, unused item(s) may be exchanged within 4 working days regarding size problem, Tags should still be on garments.

The customer is responsible for all return freight charges, including duty and tax, if applicable.

For your protection, we suggest all returns be sent back to us through a traceable carrier. Most major carriers offer tracking information.

Changing size – Worried about a wrong size if you order online ?
While we make sure to provide correct size charts for our products and encourage you to buy after proper measurements, a size problem may still happen. We offer size exchange within 4 working days of delivery.

There will be NO REFUNDS but the customer is free to exchange the product with a different product from our website as per availability.

Cancellation policy

We make sure to pack the products as soon as possible, so you get them as soon as possible, and as such, we do not offer a CANCELLATION POLICY once the order is placed. We recommend you to check in with our social media team and/or whatsapp channels if you have any doubts or questions regarding the product, before you place an order.

Please check our dealer list available here.
Any product not purchased from a Solace authorised dealer would not be covered under any terms of warranty and we take no responsibility for same.

Warranty

6th Month warranty specifically covers only manufacturing or workmanship defects. It does not cover damage caused by rips, tears, cuts, burns, abrasion, user errors, wear and tear, improper care, mishandling, misuse, neglect, unauthorized alterations/repairs, accidental damage or the degradation of the materials that occurs after use.

The following will void the warranty of the product even if the issue is unrelated to these damages:

– Rips, tears, cuts, punctures

– Burns, abrasions

– Accidental damage, crashes

– Improper Care, negligence

– Normal wear and tear#

– Damages caused by prolonged exposure to light (e.g. fading of colour) and/or heat sources

– Modifications, alterations

– Damages caused by factors/events outside Solace’s control (e.g. natural disasters)

– Use other than the product’s intended purpose

The warranty excludes loss, damage cost or expense of whatsoever nature, to personal property, user or third parties; directly or indirectly caused by, resulting from or in connection with any manufacturing defect in the product. In the case of warranty claims accepted by Solace, our liability is limited only to repair/replacement of the product or compensation for the original MRP of the product.

The customer is required to ship the product back to us on the address that we provide. The cost of returning the goods will be borne by the customer. We will not be responsible for any damage, delay or loss of the product in transit from the customer’s address to our warehouse. Once the warranty product has been delivered to our warehouse and verified against the images shared by the customer at the time of submitting the warranty claim; we will, at our discretion, either repair or replace the product. The cost of shipping the repaired/replaced product back to the customer will be borne by us.

In the case that a warranty claim is accepted for replacement, but the product is not in stock, the customer will have the option to choose between store credit or alternate replacement of the same or higher value, wherein the difference has to be borne by the customer in case of a higher value product. A store credit will be valid for 6 months from the date of issue and redeemable only at solacegears.com. Solace retains the right to offer an alternate replacement. The customer can also wait for the product to be restocked, which needs to be communicated by the customer to us, via email. No refund will be issued in the case of an accepted warranty claim.

Legal Metrology Information

Product Name: Rival Carbon Gloves
Commodity : Motorcycle Clothing
Net qty : 1 pair
Net Content: 1 pair Gloves
Imported & Distributed By: Solaceninternational,
380/207, 2 nd Cross, J C Industrial Estate,Bikasipura Main Road, KanakapuraMainnRoad, Yelachenahalli, Bangaluru – 560 078, Karnataka, India.
Country of Origin: Indonesia
Price: MRP wherever is mentioned ( Inclusive of all taxes)
Feel Free to Contact: Phone - +91-9686636166 or email –
sales@solacegears.com or write to the address same as Imported & Distributed By” address.

Wash & Care

Jackets and Pants Gloves and Boots Denims Balaclava and base layers

Maintain your product in optimal condition (Textile gear - Jackets and Pants)

As motorcycle apparel differs from other sportswear, the washing and maintenance guidelines are also distinct. Just adhere to the steps below to keep your gear clean and ready for the next ride.

Important - Always refer to the washing and care label found inside your SOLACE gear before proceeding with any washing. If your gear consists of multiple layers (for example, a thermal liner), ensure to check the label on each layer. This set of instructions supersedes any other guidance provided.

Remove all the protective armours and any interior liners. Note any L/R side markings and the orientation of the armour. Take special care not to damage the armours while removing them from the gear.
Check the pockets for earplugs and other items, and then zip them closed. Also zip close the main and sleeve zippers.
Loosen the dirt with a soft-bristled brush and diluted detergent. Now is also a good time to clean those nasty spots if any. Check for areas where dirt seems to be stuck.
Immerse the jacket in a bucket of water and mix some mild liquid detergent. Let the dirt on the jacket get loose. Scrub it with a soft brush again till all the dirt washes away. Keep rinsing it with clean water. Hand washing textile gear is the safest option. We recommend using non-scented gentle liquid detergents or shampoos. Use lukewarm water for the washing process. NEVER use any fabric softeners.
Textile apparels are best dried on a cloth hanger, in shade. This ensures the colour remains steadfast for years to come and the interior lining remains good. Want it to dry faster ? Point a fan at it. Do not tumble dry or wring the gear. Do not bleach or expose to direct sunlight.
Once the gear is dry, it's time to put armour back into their pockets. Some of our gear comes with asymmetrical armours, please do check for L and R markings before putting the armours back in while taking care not to tear or damage them.
Dry thoroughly before any long term storage.

Maintain your product in optimal condition (Leather gear - Gloves and Boots)

As motorcycle apparel differs from other sportswear, the washing and maintenance guidelines are also distinct. Just adhere to the steps below to keep your gear clean and ready for the next ride.

Undo all the velcros, buckles and buttons. Shake off any surface dirt.
Use a damp cloth to wipe the gloves and/or boots.
Loosen the dirt with a soft-bristled brush and diluted detergent. Now is also a good time to clean those nasty spots if any. Check for areas where dirt seems to be stuck. Do not forget to clean the sole of the boots.
If the inside of the gloves/boots is too dirty, only then proceed with washing it in lukewarm water with a very mild shampoo. Use a soft brush to clean the insides if needed. Rinse until the water runs clean.
Use a thick gsm towel or absorbent papers to speed up the drying process for the insides of the gloves and/or boots. We recommend wearing them in between the drying process to avoid shape deformation.
Gloves/boots are best dried in shade. Do not tumble dry or wring the gear. Do not bleach or expose to direct sunlight.
Skip for textile gloves. Once the gear is dry, proceed with using a good quality fabric conditioner. Apply a little amount on a cloth and use that cloth to condition the leathers thoroughly.

Maintain your product in optimal condition (Denim gear - Jackets and Jeans) The denims we make are not just your average denims.

Avoid cleaning products that contain bleach, solvents or other harsh chemical ingredients.
Always follow the washing and care label in your SOLACE denims.
Wash your denims when necessary. Do remember that whenever you wash your denims, the water washes out some of the dye. So, wash them inside out to keep and maintain the used look with the lighter areas on your denims.

Remove all the protective armours and any interior liners. Note any L/R side markings and the orientation of the armour. Take special care not to damage the armours while removing them from the gear.
Check and remove any items from the pockets.
Loosen the dirt with a soft-bristled brush and diluted detergent. Now is also a good time to clean those nasty spots if any. Check for areas where dirt seems to be stuck. Close all the buttons and zippers before proceeding with the next steps.
Turn the jeans inside out and then immerse it in a bucket of water and mix some mild liquid detergent. Keep rinsing until the water runs clean. You can also wash the denims in a washing machine at gentle settings.We recommend using non-scented gentle liquid detergents or shampoos. Use lukewarm water for the washing process. NEVER use any fabric softeners.
Denims are best dried on a cloth hanger, in shade. This ensures the colour remains steadfast for years to come and the interior lining remains good. Do not tumble dry or wring the gear. Do not bleach or expose to direct sunlight.
Once the gear is dry, it's time to put armour back into their pockets. Some of our gear comes with asymmetrical armours, please do check for L and R markings before putting the armours back in while taking care not to tear or damage them.
Dry thoroughly before any long term storage.

Maintain your product in optimal condition (balaclava and base layers, non armoured jerseys, waterproof socks)

As motorcycle apparel differs from other sportswear, the washing and maintenance guidelines are also distinct. Just adhere to the steps below to keep your gear clean and ready for the next ride.

Important - Always refer to the washing and care label found inside your SOLACE gear before proceeding with any washing. If your gear consists of multiple layers (for example, a thermal liner), ensure to check the label on each layer. This set of instructions supersedes any other guidance provided.

Shake off any excess dirt.
Loosen the dirt with a soft-bristled brush and diluted detergent. Now is also a good time to clean those nasty spots if any. Check for areas where dirt seems to be stuck.
Turn the gear inside out.
Immerse the gear in a bucket of water and mix some mild liquid detergent. Let the dirt get loose. Scrub it with a soft brush if needed till all the dirt washes away. Keep rinsing it with clean water. Hand washing textile gear is the safest option. We recommend using non-scented gentle liquid detergents or shampoos. Use lukewarm water for the washing process. NEVER use any fabric softeners.
Textile apparels are best dried on a cloth hanger, in shade. This ensures the colour remains steadfast for years to come. Want it to dry faster ? Point a fan at it. Do not tumble dry or wring the gear. Do not bleach or expose to direct sunlight.
Dry thoroughly before any long term storage. Flip the gear right side out before usage.

You may also like

Rival Carbon CE Gloves (Camo)

Safe checkout